WHAT'S INCLUDED?
- Gasoline Chain Saw,
- 20" bar and chain,
- Scabbard cover (for protection against the chain amidst transportation)
- Oil & Gas Tank (for mixing purposes),
- Owner's Manual (English language only),
- 2 Allen's wrenches,
- Guard teeth
- Combination Screwdriver and wrench for adjusting bar and chain
- Small screw driver for adjusting amount of chain lubricant dispensed
- Pouch for carrying tools included
- 3/16" File
SPECIFICATIONS OF CHAIN SAW:
Please see the picture I posted for details. Having said that, there are a couple things I want to point out:
1. The box says it is a 3.0 HP chain saw while the listing and manual states a 2.6 HP engine
2. The instructions state it is compatible with an 18", 20" and 22" bar. However, the box states 18" and 20"
I have asked that question to the manufacturer, but I didn't receive a response.
BACKGROUND FOR MY PURCHASE:
I've used strictly Stihl chain saws for cutting trees in the past. I currently have 2 that I use around the house and on 450 acres. I'm not a logger or farmer by profession, but I've used them enough to know my way around a chain saw.
AFTER YOU RECEIVE THE CHAIN SAW:
As you might expect, you have a bit of assembly to do. You have to install the guard teeth (extremely easy) with 2 bolts using the supplied allen's wrench. Next you install the bar and chain and tighten. This is standard with any chain saw. If you aren't sure how to do it, you can watch a YouTube video. There are hundreds on how to install the bar and chain. It's not too difficult though.
STARTING THE SAW:
The chain saw cold-starts very easily. It's probably easier to start than either of my Stihl's. See video for more details.
REVIEW:
The first thing I used this for was to remove a tree that had fallen and tore down the barbed wire fencing. The saw was easily able to cut the tree. Granted, this tree wasn't 300 years old. It was probably 15" in diameter. The saw had power to sufficiently cut through the tree with no issues. I've used it off-and-on for a few years since and have been pleased! I had to adjust the automatic flow of chain lubricant on the bottom (you turn a screw with the included screwdriver). The balance of the saw is very similar to my other saws. It has molded grips with rubber bumps on it. The bumps provide positive grip with the saw, particularly if you choose to use gloves. If you are using your bare hands, it might be a bit rough after hours of use.
Any downsides? I wish this saw came with a carry case where you could throw in your tools and a can of bar and chain lubricant. However, it's hard to argue about that given the price. Also, I don't know what the warranty on this saw is or where you might get replacement parts for it.
WHO IS THIS SAW INTENDED FOR?
I think this saw is intended for homeowners and ranchers/farmers wanting a light to medium-duty saw. If you are a professional logger or using your saw for hours, you want to upgrade (as you would expect).
FYI: the replacement chain is 20 inch .325 pitch, .058 gauge and 76 drive links
29 comments:
Hi Chip, thanks for posting some information on this Homdox saw, there's really not many reviews or discussion about these saws anywhere else. I just took a chance and bought the 62CC version, I'm definitely a little nervous about the purchase but for $130 I thought it was worth a try.
Yeah, I was kind of thinking the same thing. If it didn't work out, maybe I could at least recoup part of that. If you have problems, let me know and I will put you in touch with one of their employees who could likely help. Good luck and I hope you like it!
Sounds good, thanks much!
www.aliexpress.comn
im geting 2 Homax 20inch 60cc gas chain saws for only 176.66 shiped for both
i think that s a good deal
www.aliexpress.comn
im geting 2 Homax 20inch 60cc gas chain saws for only 176.66 shiped for both
i think that s a good deal
I hadn't had a chance to use the 60cc chain saw, but I hope you like them!
I purchased mine off Ebay for $79.80 and free shipping.
Homdex CS5200, 52cc, 25:1 mixture, 20" chain.
Tried a few test cuts and I am impressed with the value.
This is a very good chainsaw.
Beats a Poulan which sells for twice the price.
BTW, is this a clone of the Stihl, Husquarvana, ???
I did see a review somewhere that mentioned it having a Husqvarna built engine, but I haven't been able to confirm that. Still haven't had a chance to put mine together and give er a try but probably will this weekend. Glad you seemed to have a good first impression, I'm still nervous about my purchase!
I finally got around to putting the saw together today and I'm finding a strange issue when I try to start it. When I watch the video the second step when you go to start it is to lock the throttle, then pull the choke out (the instruction book says the same). My saw has no knob or any other mechanism of being able to lock the throttle, so I'm not able to get it started. Has anyone else with the 62cc model had that issue or am I completely missing something? Any help is appreciated, thanks!
Take a picture of the handle/throttle/choke area of the saw and send it to ddfky@hotmail.com. I'll try to help. If I can't help, I'll give you the contact information for a worker there. I had a question and they sent me a video.
On mine, there is a black piece on the upper-left portion of the handle that you press and then depress the throttle. That then locks the throttle.
I cant seem to find anything online for replacement bar and chains.
I don't believe it takes a special bar and chain. I think it should work with any 18 or 20" bar and chain.
Can you please tell me where to get a replace chain? And the chain number and size,please? We have tried a 20 inch and an 18 chain from home depot and it will not fit correctly. We have the Homdox 5200cc 20
Here is a chain that they recommend using: https://www.amazon.com/dp/B008PD0XMO?psc=1
They recommend using 0.325" 058 gauge
Nice video. Useful information shared..I am very happy to read this article. Thanks for giving us nice info. Fantastic walk-through. I appreciate this post click here
Thanks for the kind words! Glad I could be of assistance!
I have a problem with chain getting loose after a short period of use any one else have this problem
It sounds like you need to tighten the nuts
I didn't get a manual with mine. Do you know where I can get one. Couldn't find it online.
I would recommend searching them on Amazon and sending a message to the seller on there. They might be able to email one to you.
How about parts on these saws?No parts wouldn't be good.
I'm not sure I follow your question. Can you phrase it another way?
I have same problem use for a few minutes loose chain tighten again good for a few min
I wonder if using a nut before torquing the bolt wouldn't provide longer use
52cc was running great then would not start/weak spark. Figured it is a bad coil so I ordered two coils from china off of ebay. (4.19 each)free shipping.Only problem is three weeks to get them...so for now mcculloch mini mac 6....dang it1
Oh yeah I forgot to mention (weak coil guy) Throttle lock would not engage so I keep a cable tie around the grip so I can keep throttle open when I start it...not a real big deal though....also I needed to adjust the carb when I got it ...not a big deal if you are handy with chainsaws......Then it was really working good until? weak spark...it still starts but kills when you give her the juice...Everything else checks out....
I haven't had any issues with mine yet. The carburetor has been tuned fine. I did have to redo the starter coil spring when it arrived. It's been ok since. The choke is a little weak on mine. I don't know how long that might hold up, but overall I've been happy with it to date.
How do I get parts of this, I need a spark plug cap.
Post a Comment